Shop

DRY-UP Baseboard: 4ft Single Length

SKU: BB-00-4R

DRY-UP Baseboard: 4ft Single Length. DRY-UP Baseboard included with all DRY-UP Baseboard DIY Kits with additional lengths in larger kits. For custom sizing, order a complete kit and additional lengths of baseboard, joint connectors, and adhesive.

DRY-UP Baseboard: Inside & Outside Corners

DRY-UP Baseboard: Inside & Outside Corners Use outside corner for end stop to create wrap-around, watertight seal.

DRY-UP Baseboard: Joint Connector (single pre-cut 3" piece)

SKU: BB-6400-01R

DRY-UP Baseboard: Joint Connectors included with all DRY-UP Baseboard DIY Kits with additional connectors in larger kits. For custom sizing, order a complete kit and additional lengths of baseboard, joint connectors, and adhesive.

DRY-UP Baseboard DIY Kit

DRY-UP Baseboard DIY Kit Contents vary depending on linear length chosen - but each 12' increment will contain the appropriate amount of DRY-UP Joint Connectors, Extenda Bond Adhesive and cleaning tools needed for a complete install, with an ample amount of extra. (inside/outside corners must be purchased separately)     The DRY-UP Baseboard DIY Waterproofing Kit includes: DRY-UP Baseboard (cut in 4 foot lengths) DRY-UP Joint Connectors Extenda Bond Adhesive DRY-UP

Extenda Bond Adhesive (10.3oz tube)

Extenda Bond Adhesive - (10.3 oz tubes – covers approx. 4 ft of baseboard)

Dimple Board

DRY-UP Dimple Board — drainage membrane for basement waterproofing.

DRY-UP Dimple Board SuperPlugs (Bag of 50)

SKU: DB-450-R

DRY-UP Dimple Board SuperPlugs (Bag of 50) Each plug has 5 dimples that interlock into the membrane providing superior holding strength over a single plug. Recommended in all areas. Super Plugs are installed by using a masonry screw anchor like the brand name Tapcon®. A Pneumatic nailer can also be used. 2 bags cover approximately one full roll of dimple board (7'11" high x 65' long). Dimensions below are shipping dimensions.

Slope Cap Membrane 4ft long (bundle of 10)

SKU: DB-410-R

Slope Cap Membrane 4ft long (bundle of 10) Smooth (no dimples) L shaped molding. It is used on the sides of the Dimple Board waterproofing membrane to cap it off in sloped areas. 40 feet per bundle. Dimensions below are shipping dimensions.

Top Cap Membrane Dimple Grip Molding 4ft long (bundle of 10)

SKU: DB-411-R

Top Cap Membrane Dimple Grip Molding 4ft long (bundle of 10) Use this at the top of your Dimple Board waterproofing membrane in exterior installations. It has a flexible rubbery flange at the top to direct the water over the top to keep it outside. It interlocks with the top 4 rows of the membrane along its entire length - like a loose Lego piece. Provides superior strength and uses less Super Plugs and labor. Each length is 4' long, 10 included in each bundle--40' total. Dimensions be

Parallel Gorilla Brace

For basement walls that run parallel to your floor joists.

Perpendicular Gorilla Brace

For basement walls that run perpendicular to your floor joists.

Torque Wrench

SKU: GB-TW

Torque Wrench — 1/2" drive, heavy duty reversible cam & pawl mechanism.